7 Advanced Settings
134
[Assurance Level]
Set the assurance level, which affects whether to surely create image logs, from [Low] and
[High].
If you select [Low], image logs may not be created depending on the conditions.
[Resolution]
Set the resolution of images to be managed as the logs.
[Page Range]
Set the page range of images to be managed as the logs.
[Transfer Image Log]
Image logs created on the device can be transferred to a log management server for
storage and management.
[Log Transfer]
Set whether or not to transfer an image log to a log management server with the Log
Transfer feature.
[Assurance Level]
Set the assurance level, which affects whether an image log is surely transferred to a log
management server. When [High] is set and if an image log transfer fails, up to 2000 logs
are saved in the device as an untransferred log. When the number of untransferred logs
saved in the device exceeds 2000, the next job will not be executed. While [Low] is set, the
next job is executed and if the number of image logs untransferred exceeds 2000, the logs
are deleted in chronological order.
[Logs To Transfer]
Set whether or not to automatically transfer image logs to a log management server.
[Schedule Transfer]
This item is displayed when [Logs To Transfer] is set to [Accumulate & Transfer].
Set whether or not to transfer the image logs at the same time of every day.
[Transfer Timing]
This item is displayed when [Logs To Transfer] is set to [Accumulate & Transfer].
Specifies when to transfer image logs to a log management server.
[Plug-in Settings]
You can browse list of available Plug-ins when you use the custom authentication and set
to switch Plug-ins.
This item is displayed when the Extensible Customization Function is set to be enabled.
The verification of digital signature is supported by CentreWare Internet Services. For more information, refer
to the help of CentreWare Internet Services.
[Embedded Plug-ins]
Set whether or not to use the embedded plug-ins.
To Next Page
Loading...
Need help?
General
