7 Advanced Settings
152
[Preferred DNS Server], [Alternate DNS Server 1], [Alternate DNS Server 2]
When you clear the [Get IP Address from DHCP] checkmark, manually set the DNS server
address.
Specify alternate DNS server addresses for [Alternate DNS Server 1] and [Alternate DNS
Server 2].
[Automatically Configured IPv6 Address]
Displays the automatically assigned IP addresses.
When setting a manual IP address, auto stateless addresses that are automatically assigned are up to 2.
[IPv6 - IP Filter]
Select whether or not to limit the IPv6 addresses that can access the device.
[IPv6 - IP Filter] applies to all features using TCP/IP, such as printing, CentreWare Internet Services, and Web
Applications services.
To set the IPv6 addresses that the device accepts connection from, use [IP Filtering] in CentreWare Internet
Services. For more information, refer to the help of CentreWare Internet Services or refer to "Using
CentreWare Internet Services" (P.64).
[Ping Connection Test]
Allows you to confirm whether the device connects your computer properly or not with the
configured condition.
[Print Network Protocol Report]
Allows you to print a list of protocol settings of the primary interface.
[Device's Email Address / Host Name]
[Email Address]
Enter the email address of the device with up to 128 characters.
When receiving Email via SMTP
You can set any name for the account (on the left side of @). Set the address section (on
the right side of @), with the combination of the host name and domain name. An alias
cannot be set.
Example: mymail@myhost.example.com
Account name: mymail
Host name: myhost
Domain Name: example.com
When receiving Emails via POP3
Enter the POP3 user name (on the left side of @) and incoming POP3 mail server name in
the address section (on the right side of @). You can set an alias, such as
mymail@example.com.
Example: mymail@myhost.example.com
Account name: mymail
To Next Page
Loading...
Need help?
General
