9 Authentication and Accounting Features
200
8
Set the search scope of the directory tree.
The entry specified here becomes the root for searching the user. Specify the entry of the tree the login user
belongs to. If too many users or groups are under the root entry, it may take a long time to log in to the
device. Set the appropriate search scope.
1) Tap [Search Directory Root] to enter the root entry of search in the DN method then tap
[OK].
2) Select the search scope at [Search Scope].
3) As needed, tap [Object Class of Search Target] to enter the object class name and then
tap [OK].
9
Press the Home button then tap [Restart Now].
Other Settings (LDAP)
Encrypt the Communication Between the LDAP Server and the Device
1
Tap [Device].
2
Tap [Connectivity & Network Setup] > [Remote Authentication Server Settings].
3
Tap [LDAP Server / Directory Service Settings] > [Primary Server - Port Number].
4
Enter the port number where LDAPS runs then tap [OK].
The usual port is 636. Confirm before setting.
5
Press the Home button then tap [Restart Now].
Log in as a LDAP Server User Trusted by Active Directory
The following describes the procedure to log in to the device as a user on the trusted
domain server under the conditions listed below.
The domain name is set to "w2k8adtest.local".
The trusted relationship is established under [Active Directory Domains and Trusts].
1
Tap [Device] on the Home screen.
2
Tap [Connectivity & Network Setup] > [Remote Authentication Server Settings].
3
Tap [LDAP Server / Directory Service Settings].
4
Set [LDAP Referrals] to [Enabled].
To Next Page
Loading...
Need help?
General
