[App Settings]
143
[Standard Mode]
Uses the standard mode to process print tickets.
[Compatible Mode]
Uses the Microsoft-compliant mode to process print tickets.
[LPD Print Queue]
Set the LPD print sequence.
If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically be
changed. For more information on Receiving Buffer - LPD Spool, refer to "[Receiving Buffer - LPD]" (P.138).
[Print Upon Receipt]
Prints jobs immediately after receiving the jobs.
This setting is valid only when [Receiving Buffer - LPD] is set to [Spool]. When any other option is selected,
printing is performed in [Data Processing Order].
[Data Processing Order]
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the device to print jobs of multiple documents continuously, the device may
preferentially print a job which was sent later depending on the time for data processing.
[First In First Out]
Prints jobs in the order of lpr print submission.
This setting is valid only when [Receiving Buffer - LPD] is set to [Spool]. When any other option is selected,
printing is performed in [Data Processing Order].
[OCR Font Glyphs (0x5C)]
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
[Jobs Settings]
[Stored Job Retention Period]
You can set whether or not to automatically delete print files (Charge Print, Private Charge
Print, Secure Print, or Sample Print) stored in the device.
[Display Default of Stored Print Job List]
Set the display method of the file list of stored print jobs (Charge Print, Secure Print, Sample
Set, Delayed Print, or Private Charge Print) to [List] or [Thumbnail].
[Print Job Confirmation Screen]
Set whether or not to display a print confirmation screen for deletion of the print files
stored in the device after printing. When [Disabled] is selected, print files stored in the
device are automatically deleted after printing.
To Next Page
Loading...
Need help?
General
