Fuji Xerox DocuPrint CP475 AP User Manual

Configuration for IC Card Reader (Optional)
207
Step5 Setting to Use LDAP Server for Remote Authentication
Set the attribute to be collated with the smart card ID and the attribute used to identify the
user after the authentication.
1 Tap [Device] on the Home screen.
2 Tap [Connectivity & Network Setup] > [Remote Authentication Server Settings].
3 Tap [LDAP Server / Directory Service Settings] > [Attribute of Smart Card].
4 Enter the attribute name to be collated with the smart card ID then tap [OK].
Note

You need to set previously the card ID to the attribute.

Set the attribute surely unique to each user.
5 Tap [Network User ID Attribute].
6 Enter the attribute to become the user display name or identifier at the smart card login,
then tap [OK].
Note

Set the attribute surely unique to each user.

When the device fails to retrieve the attribute set here from the LDAP server, the user cannot log in.
7 Press the Home button then tap [Restart Now].

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English