EasyManuals Logo
Home>Fuji Xerox>Printer>DocuPrint CP475 AP

Fuji Xerox DocuPrint CP475 AP User Manual

Fuji Xerox DocuPrint CP475 AP
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #244 background imageLoading...
Page #244 background image
11 Problem Solving
250
Internet/Intranet Connection Problems
Cause Remedy
Unable to connect to the Internet/
Intranet.
Only Basic Authentication is supported by the device. The
device does not support NTLM/digest. Check if the device
supports the authentication system the remote server uses.
For security purposes, change to the authentication system
using SSL.
To use remote linkage services, purchase products/models/
accessories adopted to the desired service.
Confirm the IP address. If the IP address is incorrect, either
set a static IP address or resolve the IP address using DHCP
or AutoIP.
Set the correct IP gateway address when connecting to the
proxy server, or to a Web server via the IP gateway.
Set the correct subnet mask corresponding to your
environment.
Confirm the DNS server address.
Select a DNS server that can resolve the address.
When connecting via the proxy server
Set the IP address of a DNS server that can resolve the
address of the proxy server.
When not connecting via the proxy server
Set the IP address of a DNS server that can resolve the
destination address.
Confirm whether only addresses that do not use a proxy
server are set.
Even if addresses not through a proxy server are specified
using the FQDN, if a server is directly accessed using its IP
address, the registered server is not excluded. Set the address
not to use a proxy server.
Likewise, even if you directly specify an address that does not
use a proxy server, if a server is accessed with the FQDN, the
registered server is not excluded. Set an IP address with the
FQDN not to use a proxy server.
Confirm whether the desired server or the proxy server is
operating correctly.
Confirm whether the network cable is correctly connected.
We recommend using a spanning tree configuration, with
which network disconnection rarely occurs.
Overloading of the server application may occur to cause a
communication error. Wait for a while and try accessing
again.
An error has been occurring on the device. Even though an
error occurs during background processing, the touch screen
shows no message. Display the [Job Status] screen or print
the Job History Report to confirm the result.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CP475 AP and is the answer not in the manual?

Fuji Xerox DocuPrint CP475 AP Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CP475 AP
CategoryPrinter
LanguageEnglish

Related product manuals