The Other Print Services
93
The Other Print Services
Printing from Mobile Device
Print Utility (Android OS/iOS), AirPrint (iOS), and Mopria (Android OS) allow you to send
print jobs from mobile devices to the device. This section explains how to print from an
Android device using Print Utility as an example.
You can download Print Utility for Android from Google Play and Print Utility for iOS from App Store for free.
For more information on operation, refer to the instruction manual for your mobile device.
For more information on Print Utility, refer to our official web site.
1
Start [Fuji Xerox Print Utility].
2
Tap [Print] and select items you want to print.
3
Tap [Settings].
4
Tap [No Printer Registered], select the device and tap [Close].
5
Tap [Print].
If the desired printer does not appear on the list, tap [Setup by Manual] and set the IP address of Wi-Fi Direct.
You can check the IP address by referring the procedure in "Manual Connect on Android OS/iOS" (P.42).
Print via NFC
If your mobile device supports the NFC touch print feature, holding the mobile device near
the NFC area on the control panel allows you to print files easily.
To enable the NFC feature on the device, use CentreWare Internet Services.
Enabling the NFC Setting
1
Start CentreWare Internet Services and log in to the System Administration mode.
2
Click [Network] on the left menu.
3
Click [NFC] under [Connections].
4
Set to [Enable].
5
Click [Save].
Rebooting the device is required to enable the settings. Reboot the device following the message on the
screen.
To Next Page
Loading...
Need help?
General
