HP 10500 series User Manual

172
Binding a service instance with a VPLS instance
To bind a service instance with a VPLS instance, create the service instance on a Layer 2 Ethernet
interface, configure a packet matching rule for the service instance, and then bind the service instance
with the VPLS instance. After these configurations, packets that arrive at the Layer 2 Ethernet interface
and match the packet matching rule are forwarded by the bound VPLS instance. A service instance
supports multiple types of packet matching rules (such as matching all packets received on the port,
packets carrying the specified VLAN tags, all tagged packets, and all packets with no VLAN tags),
providing a more flexible VPLS instance access control. Use this method when users connected to a VLAN
interface belong to different VPNs. For more information about service instances, see Layer 2—LAN
Switching Configuration Guide.
To bind a service instance with a VPLS instance:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter the view of the interface
connected to a CE.
interface interface-type
interface-number
N/A
3. Create a service instance and
enter its view.
service-instance service-instance-id
By default, no service instance is
created.
4. Configure a packet matching
rule for the service instance.
encapsulation { s-vid vlan-id
[ only-tagged ] | port-based |
tagged | untagged }
By default, no packet matching rule
is configured for a service
instance.
5. Associate the service instance
with a VPLS instance.
xconnect vsi vsi-name
[ access-mode { ethernet | vlan } ] *
By default, a service instance is not
associated with any VPLS instance.
Configuring MAC address learning
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSI view.
vsi vsi-name N/A
3. Enable or disable MAC
address learning for the VPLS
instance.
mac-learning { enable | disable }
Optional.
Enabled by default.
Configuring VPLS instance attributes
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSI view.
vsi vsi-name N/A

HP 10500 series Specifications

General

Brand	HP
Model	10500 series
Category	Switch
Language	English