360
Task Command Remarks
Display information about the IPv6
routing table associated with a
VPN instance.
display ipv6 routing-table vpn-instance
vpn-instance-name [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about a
specified or all VPN instances.
display ip vpn-instance [ instance-name
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about the IPv6
FIB of a VPN instance.
display ipv6 fib vpn-instance
vpn-instance-name [ acl6 acl6-number |
ipv6-prefix ipv6-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display a VPN instance's FIB
entries that match the specified
destination IPv6 address.
display ipv6 fib vpn-instance
vpn-instance-name ipv6-address
[ prefix-length ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about BGP
VPNv6 peers established between
PEs.
display bgp vpnv6 all peer [ ipv4-address
verbose | verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about IPv6
BGP peers established between the
PE and CE in a VPN instance.
display bgp vpnv6 vpn-instance
vpn-instance-name peer [ ipv6-address
verbose | verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display all BGP VPNv6 routing
information.
display bgp vpnv6 all routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ip-address
{ advertised-routes | received-routes }
[ statistic ] | statistic ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the BGP VPNv6 routing
information of a specified RD.
display bgp vpnv6 route-distinguisher
route-distinguisher routing-table
[ network-address prefix-length ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the BGP VPNv6 routing
information of a specified VPN
instance.
display bgp vpnv6 vpn-instance
vpn-instance-name routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ipv6-address
{ advertised-routes | received-routes } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.
IPv6 MPLS L3VPN configuration examples
This section provides examples for configuring IPv6 MPLS L3VPN.