HP 10500 series User Manual

207
Ste
p
Command Remarks
3. Create a CE, specify the
CE name, CE ID, and the
CE ID initial offset, and
enter MPLS L2VPN CE
view.
ce ce-name [ id ce-id [ range ce-range ]
[ default-offset ce-offset ] ]
N/A
4. Create a Kompella
connection.
connection [ ce-offset id ] interface
interface-type interface-number
[ tunnel-policy tunnel-policy-name ]
The ce-offset ce-id option
determines whether the connection
is a local connection or a remote
connection. If the specified CE is
connected to the same PE as the
local CE, the connection is a local
connection. Otherwise, the
connection is a remote connection.
The interface interface-type
interface-number option specifies a
PE-CE interface of the PE. By
specifying the interface, you bind
the AC link on the interface to the
Kompella connection.
Resetting L2VPN BGP sessions
To apply new settings that affect route selection, reset L2VPN BGP sessions in user view.
Task Command
Reset L2VPN BGP sessions.
reset bgp l2vpn { as-number | ip-address | all |
external | internal }
Displaying and maintaining MPLS L2VPN
Task Command Remarks
Display information about CCC
connections.
display ccc [ ccc-name ccc-name |
type { local | remote } ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display information about
specified L2VPN VC interfaces.
display l2vpn ccc-interface vc-type
{ all | bgp-vc | ccc | ldp-vc |
static-vc } [ up | down ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display information about static
VCs.
display mpls static-l2vc [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.

HP 10500 series Specifications

General

Brand	HP
Model	10500 series
Category	Switch
Language	English