HP XP7 User Manual

7. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Changing the pool subscription limit
The Storage Administrator (Provisioning) role is required to perform this task.
1. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
2. From the Pools table, select the pool with the subscription limit you want to change.
3. Click More Actions, then select Edit Pools.
4. In the Edit Pools window, check Subscription Limit, then type the subscription limit percentage.
If the subscription limit is blank, then it is disabled, and any amount of THP V-VOLs can be
created regardless of the pool free capacity.
5. Click Finish.
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Working with SIMs
About SIMs
Thin Provisioning and Smart Tiers provide Service Information Messages (SIMs) to report the status
of the THP V-VOLs and pools. The SIM level is Moderate. If an event associated with a pool occurs,
a SIM and an SNMP trap are reported.
An example of a SIM condition is if the actual pool usage rate is 50.2%, but only 50% is displayed
because the capacity amount is truncated after the decimal point. If the threshold is set to 50%, a
SIM and an SNMP trap are reported, even though the pool usage rate displayed on the GUI does
not indicate the threshold is exceeded.
SIM reference codes
The following table provides information about SIM reference codes associated with Thin
Provisioning or Smart Tiers.
Types of reportsThresholds or ValuesEventSIM Code (XXX
= hexadecimal
pool number)
Does it need
operations by the
operator?
Does it need
completion
operations from
Remote Web
Console?
Is the report
notified to
the host?
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Warning Threshold
620XXX
Default: 70%
NoYesYes100%Pool is full622XXX
YesNoYesNot applicableError occurred in the
pool
623XXX
YesYesYesNot applicableNo space in the
shared memory
624000
NoYesYesHighest pool thresholdPool usage level
continues to exceed
625000
the highest pool
Working with SIMs 141

HP XP7 Specifications

General

Brand	HP
Model	XP7
Category	Storage
Language	English