4. The used pool capacity of primary volumes appears on the Used Pool Capacity column.
For details about Fast Snap pair, see XP7 Fast Snap User Guide.
Viewing formatted pool capacity
The Storage Administrator (Provisioning) role is required to perform this task.
1. In the Storage Systems tree on the left pane of the top window, select Pool.
2. From the Pools table on the right, click the row of a pool you want to confirm the free pool
capacity.
3. Click More Actions to select View Pool Management Status.
The View Pool Management Status window appears.
Following are cases that the free space of the pool is not formatted. In those cases, the free space
of the pool may not increase:
• Pools other than the selected pool are being formatted.
• The pool usage level reaches up to the warning threshold or the depletion threshold.
• The selected pool is blocked.
• I/O loads to the storage system are high.
• The cache memory is blocked.
• Pool-VOLs in the selected pool are blocked.
• Pool-VOLs which are external volumes in the selected pool are blocked.
• Correction access executes to the pool-VOL in the selected pool.
Managing pools and THP V-VOLs 145
To Next Page
Loading...
Need help?
General
