DescriptionItem
Identifier of the port.Port ID
Name of the host group.Host Group Name
The host mode of the host group.Host Mode
Attribute of the port indicating I/O flow.Port Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
• External: Issues I/O commands to a target port of an external storage
system with External Storage.
LUN security setting (Enabled or Disabled) on the port.Port Security
Number of hosts registered in the host group.Number of Hosts
Details about the selected host group.Detail
Add to Host Groups Confirm window
Confirm proposed settings, name the task, then click Apply. The task will be added to the execution
queue.
Add to Host Groups wizard (when specific host is selected) 395
To Next Page
Loading...
Need help?
General
