DescriptionItem
Specify Enable or Disable for the performing of the tier relocation. You can
specify this function only when the V-VOLs using Smart Tiers or Smart Tiers Z
are available.
Tier Relocation
Specify the relocation priority assigned to the LDEV. You can set this function
under the following conditions:
Relocation Priority
• When there are V-VOLs where Smart Tiers or Smart Tiers Z is enabled.
• When the tier relocation is enabled.
Edit LDEVs Confirm window
Confirm proposed settings, name the task, then click Apply. The task will be added to the execution
queue.
DescriptionItem
LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
LDEV name, including the combination of prefix characters and the initial
number.
LDEV Name
Parity group identifier.Parity Group ID
Pool name and pool identifier.Pool Name (ID)
Emulation type.Emulation Type
LDEV capacity.Capacity
Type of LDEV.Provisioning Type
Basic: Internal volume.
THP: THP V-VOL.
270 LDEV GUI reference
To Next Page
Loading...
Need help?
General
