HP XP7 User Manual

ConditionOperation name
Suspend pairs
Resynchronize pairs
Release pairs
Continuous Access Synchronous
The following table provides information about specific Continuous Access Synchronous conditions
that must be observed when using Resource Partition.
ConditionOperation name
Specified ports must be assigned to the user.Edit Ports
Specified initiator ports must be assigned to the user.Add Remote Connection
Operation can be performed with no conditions.Edit Remote Connection Options
Primary volumes must be assigned to the user.Create Pairs
Initiator ports of remote paths that are connected with the primary volume in the
remote storage must be assigned to the user.
Specified primary volumes or secondary volumes must be assigned to the user.Split Pairs
Primary volumes must be assigned to the user.Resync Pairs
Specified volumes must be assigned to the user.Delete Pairs
If primary volumes are specified, the initiator ports of remote paths that are
connected with the primary volume in the remote storage must be assigned to the
user.
Primary volumes must be assigned to the user.Edit Pair Options
Specified initiator ports must be assigned to the user.Add Remote Paths
Specified initiator ports must be assigned to the user.Remove Remote Paths
Initiator ports of remote paths that are connected to a specified remote storage
must be assigned to the user.
Edit Remote Connection Options
Initiator ports of remote paths that are connected to a specified remote storage
must be assigned to the user.
Remove Remote Connections
Specified primary volumes or secondary volumes must be assigned to the user.Force Delete Pairs
High Availability
The following table provides information about specific High Availability conditions that must be
observed when using Resource Partition.
ConditionOperation name
Specified ports must be assigned to the user.Edit Ports
Specified initiator ports must be assigned to the user.Add Remote Connection
Operation can be performed with no conditions.Edit Remote Connection Options
Primary volumes must be assigned to the user.Create Pairs
Initiator ports of remote paths that are connected with the primary volume in the
remote storage must be assigned to the user.
Specified primary volumes or secondary volumes must be assigned to the user.Split Pairs
Using Resource Partition and other HP XP7 Storage products 39

HP XP7 Specifications

General

Brand	HP
Model	XP7
Category	Storage
Language	English