HPE FlexNetwork MSR3012 User Manual

115
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about all IPv4 SNTP associations.
<Sysname>display sntp sessions
SNTP server Stratum Version Last receive time
1.0.1.112 4 Tue, May 17 2011 9:11:20.833 (Synced)
Table 20 Command output
Field
Description
SNTP server
SNTP server (NTP server). If this field displays
0.0.0.0
, the IP address of the NTP
server has not been resolved successfully.
Stratum
Stratum level of the
NTP server, which determines the clock accuracy. It is in the
range of 1 to 16. A lower stratum level represents higher clock accuracy. A clock
with stratum level 16 is not synchronized.
Version SNTP version.
Last receive time
Time when the last message
was received. Synced means the local clock is
synchronized to the NTP server.
sntp authentication enable
Use sntp authentication enable to enable SNTP authentication.
Use undo sntp authentication enable to disable SNTP authentication.
Syntax
sntp authentication enable
undo sntp authentication enable
Default
SNTP authentication is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You need to enable SNTP authentication in networks that require time synchronization security to
make sure SNTP clients are synchronized only to authenticated NTP servers.
To authenticate an NTP server, set an authentication key and specify it as a trusted key.
Examples
# Enable SNTP authentication.
<Sysname> system-view
[Sysname] sntp authentication enable

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English