HPE FlexNetwork MSR3012 User Manual

304
Related commands
reset exception context
display exception filepath
Use display exception filepath to display the core file directory.
Syntax
Centralized devices in standalone mode:
display exception filepath
Distributed devices in standalone mode/centralized devices in IRF mode:
display exception filepath [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display exception filepath [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command displays the core file directory on the active MPU. (Distributed devices in standalone
mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays the core file directory on the IRF master device. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command displays the core file directory on the global active MPU.
(Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Examples
# Display the core file directory on the MPU. (Centralized devices in standalone mode.)
<Sysname> display exception filepath
The exception filepath is flash:.
# Display the core file directory on the active MPU. (Distributed devices in standalone
mode/centralized devices in IRF mode.)
<Sysname> display exception filepath
The exception filepath on slot 0 is flash:.
# Display the core file directory on the standby MPU. (Distributed devices in standalone
mode/centralized devices in IRF mode.)
<Sysname> display exception filepath slot 1
The exception filepath on slot 1 is NULL.
# Display the core file directory on the global active MPU. (Distributed devices in IRF mode.)
<Sysname> display exception filepath
The exception filepath on chassis 0 slot 1 is flash:.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands