HPE FlexNetwork MSR3012 User Manual

379
•
Destination address mask length.
•
Destination prefix.
•
Inbound interface index.
•
Outbound interface index.
tos-protocol-port: Specifies the ToS-protocol-port aggregation by ToS, protocol number, source
port, destination port, inbound interface index, and outbound interface index.
tos-source-prefix: Specifies the ToS-source-prefix aggregation by ToS, source AS number, source
prefix, source address mask length, and inbound interface index.
Usage guidelines
In NetStream aggregation mode view, you can perform the following tasks:
•
Enable or disable the specified NetStream aggregation mode.
•
Configure source interface, destination IP address, and destination port for the NetStream data
export.
A flow matching multiple aggregation modes is counted as multiple aggregate flows.
Examples
# Set the NetStream aggregation mode to AS, and enter NetStream AS aggregation mode view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as]
Related commands
enable
ip netstream export host
ip netstream export source
ip netstream export host
Use ip netstream export host to specify a destination host for NetStream data export.
Use undo ip netstream export host to remove the specified destination host or all destination hosts
that are configured in the current view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view
NetStream aggregation mode view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address.
udp-port: Specifies the destination UDP port number in the range of 0 to 65535.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English