HPE FlexNetwork MSR3012 User Manual

167
arp notification is disabled.
configuration notification is enabled.
l3vpn notification is enabled.
mac-address notification is enabled.
mpls notification is disabled.
ospfv3 notification is enabled.
radius notification is disabled.
standard notification is enabled.
stp notification is disabled.
syslog notification is disabled.
system notification is enabled.
Enabled notifications: 6; Disabled notifications: 5
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by
engineid. When an SNMPv3 user is created, the system records the local SNMP entity engine ID.
The user becomes invalid when the engine ID changes, and it becomes valid again when the
recorded engine ID is restored.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. The
group name is case sensitive.
username user-name: Displays information about the specified SNMPv3 user. The username is
case sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent
usm-user v3 command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent
usm-user { v1 | v2c } command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English