HPE FlexNetwork MSR3012 User Manual

244
Syntax
snmp mib event trigger owner trigger-owner name trigger-name
undo snmp mib event trigger owner trigger-owner name trigger-name
Default
No trigger exists.
Views
System view
Predefined user roles
network-admin
Parameters
trigger-owner: Specifies an owner for a trigger, which must be an existing SNMPv3 user.
trigger-name: Specifies a name for a trigger, a case-sensitive string of 1 to 32 characters.
Usage guidelines
A trigger is identified by its owner and name. In trigger view, you can specify a monitored object and
set an interval for sampling the object. An event is triggered when the sampled object meets the
trigger condition.
If the trigger owner has no read access to the monitored object configured in trigger view, sampling
on the object cannot be performed. For more information about SNMPv3 user access rights, see
Network Management and Monitoring Configuration Guide.
Examples
# Create a trigger with the owner owner1 and name triggerA.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA]
snmp-agent trap enable event-mib
Use snmp-agent trap enable event-mib to enable the Event MIB trap feature.
Use undo snmp-agent trap enable event-mib to disable the Event MIB trap feature.
Syntax
snmp-agent trap enable event-mib
undo snmp-agent trap enable event-mib
Default
The Event MIB trap feature is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
After you enable the Event MIB trap feature, traps are generated when object sampling fails or a
trigger condition is met and sent to the SNMP module. Traps include trigger trap, rising threshold

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English