EasyManuals Logo
Home>HPE>Network Router>FlexNetwork MSR3012

HPE FlexNetwork MSR3012 User Manual

HPE FlexNetwork MSR3012
475 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #347 background imageLoading...
Page #347 background image
337
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the active MPU
is specified. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
master device is specified. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. If you do not
specify this option, the global active MPU is specified. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Usage guidelines
Starvation occurs when a thread is unable to access shared resources.
The command enables the system to detect and report thread starvation. If a thread is not executed
within an interval, the system considers that a starvation has occurred, and outputs a starvation
message.
Thread starvation does not impact system operation. A starved thread can automatically run when
certain conditions are met.
Inappropriate use of the command can cause service problems or system breakdown. Make sure
you understand the impact of the command on your network before you use it.
Examples
# Enable kernel thread starvation detection.
<Sysname> system-view
[Sysname] monitor kernel starvation enable
Related commands
display kernel starvation configuration
display kernel starvation
monitor kernel starvation time
monitor kernel starvation exclude-thread
monitor kernel starvation exclude-thread
Use monitor kernel starvation exclude-thread to disable kernel thread starvation detection for a
kernel thread.
Use undo monitor kernel starvation exclude-thread to enable kernel thread starvation detection
for a kernel thread.
Syntax
Centralized devices in standalone mode:
monitor kernel starvation exclude-thread tid
undo monitor kernel starvation exclude-thread [ tid ]
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor kernel starvation exclude-thread tid [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel starvation exclude-thread [ tid ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor kernel starvation exclude-thread tid [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR3012 and is the answer not in the manual?

HPE FlexNetwork MSR3012 Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR3012
CategoryNetwork Router
LanguageEnglish

Related product manuals