HPE FlexNetwork MSR3012 User Manual

247
undo startup enable
Default
An event is triggered for the first Boolean sampling.
Views
Trigger-Boolean view
Predefined user roles
network-admin
Usage guidelines
For an event to be triggered when a trigger condition is met at the first Boolean sampling, execute the
startup enable command.
If the first sampling fails or the monitored object does not exist at the first sampling, the second
sampling is considered the first sampling.
Examples
# Trigger an event for the first Boolean sampling.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] test boolean
[Sysname-trigger-owner1-triggerA-boolean] startup enable
Related commands
comparison
value
test
Use test to specify a trigger test type and enter its view.
Use undo test to remove a trigger test type.
Syntax
test { boolean | existence | threshold }
undo test { boolean | existence | threshold }
Default
No test type is specified for a trigger.
Views
Trigger view
Predefined user roles
network-admin
Parameters
boolean: Specifies the Boolean test. This test compares the value of the monitored object with the
reference value.
existence: Specifies the existence test. This test monitors the absence, presence, and change of
the monitored object.
threshold: Specifies the threshold test. This test compares the value of the monitored object with the
specified thresholds, such as rising threshold and falling threshold.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands