HPE FlexNetwork MSR3012 User Manual

454
Syntax
userlog flow export timestamp localtime
undo userlog flow export timestamp localtime
Default
The device uses the UTC time in the timestamp of flow logs.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The device uses either the local time or the UTC time in the timestamp of flow logs.
•
UTC time—Standard Greenwich Mean Time (GMT).
•
Local time—Standard GMT plus or minus the time zone offset.
The time zone offset can be configured by using the clock timezone command. For more
information, see Fundamentals Command Reference.
Examples
# Configure the device to use the local time in the timestamp of flow logs.
<Sysname> system-view
[Sysname] userlog flow export timestamp localtime
userlog flow export version
Use userlog flow export version to set the flow log version.
Use undo userlog flow export version to restore the default.
Syntax
userlog flow export version version-number
undo userlog flow export version
Default
The flow log version is 1.0.
Views
System view
Predefined user roles
network-admin
Parameters
version-number: Specifies a flow log version. Available options are 1 and 3.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the flow log version to 3.0.
<Sysname> system-view
[Sysname] userlog flow export version 3

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands