HPE FlexNetwork MSR3012 User Manual

284
Field
Description
TimeActive Time when the policy started to execute.
TimeRegistered Time when the policy was created.
Total number Total number of policies.
User-role
User roles for executing the monitor policy. To execute the monitor policy, an
administrator must have at least one of the displayed user roles.
event cli
Use event cli to configure a CLI event for a CLI-defined monitor policy.
Use undo event to delete the event in a CLI-defined monitor policy.
Syntax
event cli { async [ skip ] | sync } mode { execute | help | tab } pattern regular-exp
undo event
Default
No CLI event is configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
async [ skip ]: Enables or disables the system to execute the command that triggers the policy. If
you specify the skip keyword, the system executes the actions in the policy without executing the
command that triggers the policy. If you do not specify the skip keyword, the system executes both
the actions in the policy and the command entered at the CLI.
sync: Enables the system to execute the command that triggers the event only if the policy has been
executed successfully.
execute: Triggers the policy when a matching command is entered.
help: Triggers the policy when a question mark (?) is entered at a matching command line.
tab: Triggers the policy when the Tab key is pressed to complete a parameter in a matching
command line.
pattern regular-exp: Specifies a regular expression for matching commands that trigger the policy.
For more information about using regular expressions, see Fundamentals Configuration Guide.
Usage guidelines
Use CLI event monitor policies to monitor operations performed at the CLI.
You can configure only one event for a monitor policy. If the monitor policy already contains an event,
the new event replaces the old event.
Examples
# Configure a CLI-defined policy to monitor execution of commands that contain the dis inter brief
string. Enable the system to execute the actions in the policy without executing the command that
triggers the policy.
<Sysname>system-view

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands