HPE FlexNetwork MSR3012 User Manual

52
Voice operation view
Predefined user roles
network-admin
Parameters
packet-number: Specifies the number of packets to be sent per probe. Available value ranges
include:
•
10 to 1000 for the ICMP jitter, UDP jitter, or path jitter operation.
•
10 to 60000 for the voice operation.
Examples
# Configure the UDP jitter probe to send 100 packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout
Use probe packet-timeout to set the timeout time for waiting for a response in the UDP jitter, path
jitter, or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout timeout
undo probe packet-timeout
Default
The response timeout time in the ICMP jitter, UDP jitter, and path jitter operations is 3000
milliseconds.
The response timeout time in the voice operation is 5000 milliseconds.
Views
ICMP jitter operation view
Path jitter operation view
UDP jitter operation view
Voice operation view
Predefined user roles
network-admin
Parameters
timeout: Specifies the timeout time in milliseconds. The value range is 10 to 3600000.
Examples
# Set the response timeout time to 100 milliseconds in the UDP jitter operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands