HPE FlexNetwork MSR3012 User Manual

233
Default
The sampling interval is 600 seconds.
Views
Trigger view
Predefined user roles
network-admin
Parameters
interval: Specifies a sampling interval in the range of 1 to 4294967295 seconds. The sampling
interval must be greater than or equal to the minimum sampling interval.
Usage guidelines
To set the minimum sampling interval, execute the snmp mib event sample minimum command.
To avoid sampling failure, do not set the sampling interval too small when there are a large number of
sampled objects.
Examples
# Set the sampling interval for a trigger to 360 seconds.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] frequency 360
Related commands
snmp mib event sample minimum
snmp mib event trigger
object list (action-notification view)
Use object list to specify an object list for a notification action. The objects in the list will be added to
the notification when the notification action is triggered.
Use undo object list to restore the default.
Syntax
object list owner objects-owner name objects-name
undo object list
Default
No object list is specified for a notification action.
Views
Action-notification view
Predefined user roles
network-admin
Parameters
owner objects-owner: Specifies an object list owner. Use the event owner as the object list owner.
name objects-name: Specifies an object list name, a case-sensitive string of 1 to 32 characters.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English