HPE FlexNetwork MSR3012 User Manual

175
Related commands
display snmp-agent community
snmp-agent context
Use snmp-agent context to create an SNMP context.
Use undo snmp-agent context to delete an SNMP context.
Syntax
snmp-agent context context-name
undo snmp-agent context context-name
Default
No SNMP contexts exist.
Views
System view
Predefined use roles
network-admin
Parameters
context-name: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
For an NMS and an SNMP agent to communicate, configure the same SNMP context for them or do
not configure a context for the NMS.
You can create a maximum of 20 SNMP contexts.
Examples
# Create SNMP context testcontext.
<Sysname> system-view
[Sysname] snmp-agent context testcontext
Related commands
display snmp-agent context
snmp-agent group
Use snmp-agent group to create an SNMP group.
Use undo snmp-agent group to delete an SNMP group.
Syntax
SNMPv1 and SNMP v2c:
snmp-agent group { v1 | v2c } group-name [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl { ipv4-acl-number | name ipv4-acl-name } | acl ipv6
{ ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent group { v1 | v2c } group-name
SNMPv3 (in non-FIPS mode):

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English