HPE FlexNetwork MSR3012 User Manual

430
info-center logbuffer size
Use info-center logbuffer size to set the maximum number of logs that can be stored in the log
buffer.
Use undo info-center logbuffer size to restore the default.
Syntax
info-center logbuffer size buffersize
undo info-center logbuffer size
Default
The log buffer can store a maximum of 512 logs.
Views
System view
Predefined user roles
network-admin
Parameters
buffersize: Specifies the maximum number of logs that can be stored in the log buffer. The value
range is 0 to 1024, and the default is 512.
Examples
# Set the maximum log buffer size to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
# Restore the default maximum log buffer size.
<Sysname> system-view
[Sysname] undo info-center logbuffer size
Related commands
display logbuffer
info-center enable
info-center logfile directory
Use info-center logfile directory to specify the directory to save the log file.
Syntax
info-center logfile directory dir-name
Default
Log files are saved in the logfile directory under the root directory of the storage device.
Views
System view
Predefined user roles
network-admin
Parameters
dir-name: Specifies a directory by its name, a string of 1 to 64 characters.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands