HPE FlexNetwork MSR3012 User Manual

326
pkg_update 122 122 N N 0 -- 12-17 07:10:30 12-17 07:10:31
Table 71 Command output
Field
Description
Process Name of a user process.
JobID Job ID of a user process.
PID ID of a user process.
Abort
Indicates whether the process exited abnormally:
• Y—Yes.
• N—No.
Core
Indicates whether the process can generate core files:
• Y—Yes.
• N—No.
Exit
Process exit code. This field displays two hyphens (--) if the process was killed
by a signal.
Kill
Code of the signal that killed the process. This field displays two hyphens (--) if
the process exited instead of being killed.
StartTime Time when the user process started.
EndTime Time when the user process ended.
display process memory
Use display process memory to display memory usage for all user processes.
Syntax
Centralized devices in standalone mode:
display process memory
Distributed devices in standalone mode/centralized devices in IRF mode:
display process memory [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process memory [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays memory usage for all user processes on the active MPU. (Distributed devices in standalone
mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device. (Centralized devices in IRF mode.)

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands