243
Examples
# Set the maximum number to 10 for the object instances that can be concurrently sampled.
<Sysname> system-view
[Sysname] snmp mib event sample instance maximum 10
Related commands
snmp mib event sample minimum
snmp mib event sample minimum
Use snmp mib event sample minimum to specify the minimum sampling interval.
Use undo snmp mib event sample minimum to restore the default.
Syntax
snmp mib event sample minimum min-number
undo snmp mib event sample minimum
Default
The minimum sampling interval is 1 second.
Views
System view
Predefined user roles
network-admin
Parameters
min-number: Specifies the minimum sampling interval in the range of 1 to 2147483647, in seconds.
Usage guidelines
After you configure the minimum sampling interval, make sure the trigger sampling interval is greater
than or equal to the minimum sampling interval.
Changing the minimum sampling interval does not affect the existing instances. If the minimum
sampling interval is changed to a value smaller than the sampling interval of a trigger, the existing
instances of the trigger will continue to be sampled at its interval.
Examples
# Set the minimum sampling interval to 50 seconds.
<Sysname> system-view
[Sysname] snmp mib event sample minimum 50
Related commands
frequency
snmp mib event trigger
snmp mib event trigger
Use snmp mib event trigger to create a trigger and enter its view, or enter the view of an existing
trigger.
Use undo snmp mib event trigger to remove a trigger.
To Next Page
Loading...
Need help?
General
