HPE FlexNetwork MSR3012 User Manual

144
# Set the maximum PI power to 12000 milliwatts in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
Related commands
poe max-power (system view)
poe max-power (system view)
Use poe max-power to set the maximum PSE power.
Use undo poe max-power to restore the default.
Syntax
poe pse pse-id max-power max-power
undo poe pse pse-id max-power
Default
The maximum PSE power is 37 watts.
Views
System view
Predefined user roles
network-admin
Parameters
max-power: Sets the maximum PSE power in watts. The value range for the SIC-4FSWP is from 37
watts to 87 watts. The value range for the DSIC-9FSWP is from 37 watts to 174 watts.
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
To avoid the PSE power overload situation, make sure the total power of all PSEs is less than the
maximum PoE power.
The maximum power of the PSE must be greater than or equal to the total maximum power of all its
critical PIs on the PSE to guarantee these PIs power.
Examples
# Set the maximum PSE power of PSE 7 to 150 watts.
<Sysname> system-view
[Sysname] poe pse 7 max-power 150
Related commands
poe priority pse
poe pd-description
Use poe pd-description to configure a description for the PD that connects to a PI.
Use undo poe pd-description to restore the default.
Syntax
poe pd-description text

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English