296
undo rtm scheduler suspend
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command disables all CLI-defined and Tcl-defined monitor policies except for the monitor
policies that are running.
To revise the Tcl script of a policy, you must suspend all monitor policies first, and then resume the
policies after you finish revising the script. The system cannot execute a Tcl-defined policy if you edit
its Tcl script without suspending all monitor policies.
Examples
# Suspend monitor policies.
<Sysname> system-view
[Sysname] rtm scheduler suspend
rtm tcl-policy
Use rtm tcl-policy to create a Tcl-defined policy and bind it to a Tcl script file.
Use undo rtm tcl-policy to delete a Tcl policy.
Syntax
rtm tcl-policy policy-name tcl-filename
undo rtm tcl-policy policy-name
Default
No Tcl policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a policy name, a case-sensitive string of 1 to 63 characters.
tcl-filename: Specifies a .tcl script file name. The file name is case sensitive. You must make sure the
file is available on a storage medium of the device.
Usage guidelines
When you use this command to create a Tcl-defined policy, follow these guidelines:
(Centralized devices in IRF mode.) Make sure the script file is saved on all IRF member devices.
This practice ensures that the policy can run correctly after a master/subordinate switchover occurs
or the member device where the script file resides leaves the IRF.
(Distributed devices in IRF or standalone mode.) Make sure the script file is saved on all MPUs. This
practice ensures that the policy can run correctly after an active/standby or master/standby
switchover occurs or the MPU where the script file resides fails or is removed.
This command both creates and enables the specified Tcl-defined monitor policy. To revise the Tcl
script of a Tcl-defined policy, you must suspend all monitor policies first, and then resume the policies
To Next Page
Loading...
Need help?
General
