HPE FlexNetwork MSR3012 User Manual

19
Table 6 Command output
Field Description
Index
History record ID.
The history records in one UDP tracert operation have the same ID.
TTL TTL value in the probe packet.
Response
Round-trip time if the operation succeeds, timeout time upon timeout, or 0 if the
operation cannot be completed, in milliseconds.
Hop IP IP address of the node that sent the reply packet.
Status
Status of the operation result:
• Succeeded.
• Unknown error.
• Internal error.
• Timeout.
Time Time when the operation was completed.
display nqa reaction counters
Use display nqa reaction counters to display the current monitoring results of reaction entries.
Syntax
display nqa reaction counters [ admin-name operation-tag [ item-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA
operation. The operation-tag argument represents the operation tag. Each of the arguments is a
case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an
NQA operation, the command displays the current monitoring results of reaction entries for all NQA
operations.
item-number: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a
reaction entry, the command displays the results of all reaction entries.
Usage guidelines
The result fields display hyphens (-) in one of the following conditions:
•
The threshold type is the average value.
•
The monitored performance metric is ICPIF or MOS of the voice operation.
The monitoring results of an operation are accumulated, and are not cleared after the operation
completes.
Examples
# Display the monitoring results of all reaction entries of the ICMP echo operation with administrator
name admin and operation tag test.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands