HPE FlexNetwork MSR3012 User Manual

240
snmp mib event trigger
test
sample
Use sample to specify a sampling method.
Use undo sample to restore the default.
Syntax
sample { absolute | delta }
undo sample
Default
The sampling method is absolute.
Views
Trigger view
Predefined user roles
network-admin
Parameters
absolute: Specifies the absolute sampling method. Use the current sampled value.
delta: Specifies the delta sampling method. Use the difference between the current sampled value
and previous sampled value.
Usage guidelines
For delta sampling, obtain the difference between the current sampled value and previous sampled
value as follows:
•
If the object value is UINT type, use the larger value to subtract the smaller value.
•
If the object value is INT type, use the present sampled value to subtract the previous sampled
value.
Examples
# Specify the absolute sampling method.
<Sysname>system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] sample absolute
Related commands
snmp mib event trigger
snmp mib event
Use snmp mib event to create an event and enter its view, or enter the view of an exsiting event.
Use undo snmp mib event to remove an event.
Syntax
snmp mib event owner event-owner name event-name
undo snmp mib event owner event-owner name event-name

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English