HPE FlexNetwork MSR3012 User Manual

248
Usage guidelines
For more information about the trigger tests, see the commands in the trigger-Boolean view,
trigger-existence view, and trigger-threshold view .
Examples
# Specify the existence test for a trigger.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] test existence
Related commands
snmp mib event trigger
trigger enable
Use trigger enable to enable a trigger.
Use undo trigger enable to disable a trigger.
Syntax
trigger enable
undo trigger enable
Default
A trigger is disabled.
Views
Trigger view
Predefined user roles
network-admin
Usage guidelines
Before you enable a trigger, make sure the trigger meets the following conditions:
•
A monitored object is specified for the trigger.
•
The trigger sampling interval is greater than or equal to the minimum sampling interval.
Examples
# Create and enable a trigger.
<Sysname>system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] oid 1.3.6.1.2.1.2.2.1.1.3
[Sysname-trigger-owner1-triggerA] frequency 360
[Sysname-trigger-owner1-triggerA] trigger enable
Related commands
snmp mib event trigger
type
Use type to specify existence trigger test types.
Use undo type to remove the existence trigger test types.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English