HPE FlexNetwork MSR3012 User Manual

155
Examples
# Display the local engine ID.
<Sysname> display snmp-agent local-engineid
SNMP local engine ID: 800063A2800084E52BED7900000001
Related commands
snmp-agent local-engineid
display snmp-agent mib-node
Use display snmp-agent mib-node to display SNMP MIB node information.
Syntax
display snmp-agent mib-node [ details | index-node | trap-node | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
details: Specifies detailed MIB node information, including node name, last octet of an OID string,
and name of the next leaf node.
index-node: Specifies SNMP MIB tables, and node names and OIDs of MIB index nodes.
trap-node: Specifies node names and OIDs of MIB notification nodes, and node names and OIDs of
notification objects.
verbose: Specifies detailed information about SNMP MIB nodes, including node names, OIDs, node
types, permissions to MIB nodes, data types, MORs, and parent, child, and sibling nodes.
Usage guidelines
If no keywords are specified, this command displays information about all SNMP MIB nodes,
including node name, OID, and permissions to MIB nodes.
The SNMP software package includes different MIB files. Support for MIBs varies by SNMP software
versions.
Examples
# Display SNMP MIB node information.
<Sysname> display snmp-agent mib-node
iso<1>(NA)
|-std<1.0>(NA)
|-iso8802<1.0.8802>(NA)
|-ieee802dot1<1.0.8802.1>(NA)
|-ieee802dot1mibs<1.0.8802.1.1>(NA)
|-lldpMIB<1.0.8802.1.1.2>(NA)
|-lldpNotifications<1.0.8802.1.1.2.0>(NA)
|-lldpNotificationPrefix<1.0.8802.1.1.2.0.0>(NA)
|-lldpRemTablesChange<1.0.8802.1.1.2.0.0.1>(NA)
|-lldpObjects<1.0.8802.1.1.2.1>(NA)
|-lldpConfiguration<1.0.8802.1.1.2.1.1>(NA)

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English

Summary

Ping, tracert, and system debugging commands

ping

Tests reachability of destination IP address and displays ping statistics.

tracert

NQA commands

NQA client commands

Configures NQA client operations, including factors, codec types, and data parameters.

NTP commands

SNTP commands

PoE commands

apply poe-profile

Applies a PoE profile to a power interface (PI).

SNMP commands

display snmp-agent community

Displays SNMPv1 or SNMPv2c community information.

snmp-agent community

Configures an SNMPv1 or SNMPv2c community.

snmp-agent target-host

Configures an SNMP notification target host.

snmp-agent trap enable

Enables SNMP notifications.

RMON commands

display rmon alarm

Displays information about RMON alarm entries.

rmon alarm

Event MIB commands

NETCONF commands

CWMP commands

cwmp enable

Enables CWMP.

EAA commands

action cli

Adds a CLI action to a monitor policy.

rtm cli-policy

Creates a CLI-defined EAA monitor policy and binds it to a Tcl script file.

Process monitoring and maintenance commands

display exception context

Displays context information for process exceptions.

display kernel deadloop

Displays kernel thread deadloop information.

display process

Displays process state information.

monitor kernel starvation enable

Enables kernel thread starvation detection.

Port mirroring commands

mirroring-group

Creates a mirroring group.

Flow mirroring commands

mirror-to

NetStream configuration commands

IPv6 NetStream commands

sFlow commands

Information center commands