HPE FlexNetwork MSR3012 User Manual

191
Related commands
snmp-agent target-host
snmp-agent trap enable
snmp-agent trap life
snmp-agent usm-user { v1 | v2c }
Use snmp-agent usm-user { v1 | v2c } to create an SNMPv1 or SNMPv2c user.
Use undo snmp-agent usm-user { v1 | v2c } to delete an SNMPv1 or SNMPv2c user.
Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user { v1 | v2c } user-name
Default
No SNMPv1 or SNMPv2c users exist.
Views
System view
Predefined user roles
network-admin
Parameters
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
user-name: Specifies an SNMP username, a case-sensitive string of 1 to 32 characters.
group-name: Specifies an SNMPv1 or SNMPv2c group name, a case-sensitive string of 1 to 32
characters. The group can be one that has been created or not. If the group has not been created,
the user takes effect after you create the group.
acl: Specifies a basic IPv4 ACL for the user.
ipv4-acl-number: Specifies a basic IPv4 ACL by its number in the range of 2000 to 2999.
name ipv4-acl-name: Specifies a basic IPv4 ACL for the user. The ipv4-acl-name argument
represents a basic IPv4 ACL name, a case-insensitive string of 1 to 63 characters.
acl ipv6: Specifies a basic IPv6 ACL for the user.
ipv6-acl-number: Specifies a basic IPv6 ACL by its number in the range of 2000 to 2999.
name ipv6-acl-name: Specifies a basic IPv6 ACL for the user. The ipv6-acl-name argument
represents a basic IPv6 ACL name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
This command is not available in FIPS mode.
Only users with the network-admin or level-15 user role can execute this command. Users with other
user roles cannot execute this command even if these roles are granted access to this command or
commands of the SNMP feature.
On an SNMPv1 or SNMPv2c network, NMSs and agents authenticate each other by using the
community name. On an SNMPv3 network, NMSs and agents authenticate each other by using the
username.
You can create an SNMPv1 or SNMPv2c community by using either of the following ways:

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English