Icom i9100 User Manual

100
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
• Access repeater scan’s target setting
Youcanselectthedesiredrepeatersasascantarget,
for faster selection and scanning.
Non-selected repeaters are skipped during scanning.
• When a repeater is specified as a non-scan target, its
“R1USE” setting is automatically set to NO. In this case,
the repeater cannot be selected as the access repeater.
(p. 90)
q In the DR mode, p ush [MENU] one or more times to
display the “D2” screen.
w Rotate [MAIN DIAL] to select the desired access
repeater.
 •Firstselecting therepeatercall sign groupmakes it
more convenient, if you have programmed repeaters
into Groups. See the description in page 93 for details
of the repeater call sign group selection.
e Hold down [SEL](F-2) for 1 second to set the select
setting to ON.
 •“SEL”appears.
r Push [SEL](F-2) to set the select setting to OFF.
 •“SEL”disappears.
t Push [MENU] to return to the “D2” screen.
D Access repeater scan
The Access repeater scan is useful to find a repeater.
For rapidly find, the Access repeater scan skips the
repeaters which are not specified as a scan target.
Youcanselectthedesiredrepeatersasascantarget.
See page 90 or ‘Access repeater scan’s target setting’
as described below.
q Hold down [DV•DR] for 1 second to select the DR
mode.
 •TheDVmodeisautomaticallyselected.
 •The access repeater selection screen is displayed.
- Only the repeaters, specified as a scan target are dis-
played.
w P ush [MENU] one or more time to display the “D2”
screen.
e Push [SCAN](F-1) to start the Access repeater
scan.
 •TheMHzandkHzdecimalpoints,and“ ” blink while
scanning.
 •Holddown[SCAN](F-1)for1secondtoentertheScan
set mode. Push [MENU] to exit the Scan set mode.
- If
“Up/Down” is selected as the “MAIN DIAL (SCAN)”
option
in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
 •Thescanpauseswhenasignalisreceived.
r Push [SCAN](F-1) to cancel the scan.
[DV•DR][MENU]
[SCAN]
[MAIN DIAL]
[DV•DR][MENU]
[SEL] [TS•GRP]
GRP
SCAN SEL AFC DSQ TCON
D2
R 1 :
GRP3
SCAN SEL AFC DSQ TCON
D2
R1:HIRANO43
GRP1
SCAN SEL AFC DSQ TCON
D2
R1:FUJISW43
GRP1
SEL
D2
FUJISW43
SEL
GRP1
SEL
D2
FUJISW43
When the select setting is OFF.
GRP1
SCAN SEL AFC DSQ TCON
D2
R1:HAMACH43
Rotate [MAIN DIAL]
Hold down
Push
While Access repeater scanning

Icom i9100 Specifications

General

Brand	Icom
Model	i9100
Category	Transceiver
Language	English