■Memory name programming
All Memory channels, including scan edges and Call
channel, can be tagged with alphanumeric names of
up to 9 characters each.
[EXAMPLE]: Programming a memory name into
Memory channel 99.
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select Memory channel 99.
e Push [MENU] one or more times to display the “M2”
screen (Menu 2).
r Push [MEM](F-2) to display the “MEM” screen
(Memory Menu).
t Push [EDT](F-1) to display the “EDT” screen (Mem-
ory name Edit).
•Acursorappearsandblinks.
•Ifthechannelyouselectisablankchannel,anerror
beep sounds after pushing [EDT](F1).
y Push [F-1] one or more times to select the desired
character type.
•See“Charactertablelist,”asshownbelow.
u Rotate [MAIN DIAL] to select the first character or
symbol to input.
When inputting numbers and a decimal point, push
the appropriate keypad key.
•Push[DEL](F-4)todeletetheselectedcharacter,sym-
bol or number.
•Push[SPC](F-5)toinputaspace.
•Whenall9charactershavebeenprogrammed, an error
beep sounds. If you want to reprogram, push [Ω](F-2) or
[≈](F-3) to select a character, then push [DEL](F-4) to
delete it.
i Push [Ω](F-2) to move the cursor backwards, or
push [≈](F-3) to move the cursor forwards.
o Repeat steps y to i to program a memory name
of up to 9 characters.
!0 Push [MENU] to save the name, and return to the
“MEM” screen (Memory Menu).
!1 Push [MENU] to return to the “M2” screen (Menu
2).
Character table list
Character
type
Selectable characters
ABC A to Z
abc a to z
etc
!#$%&\?" ’ ` ^ + – ✱⁄.,:;=<>()[]{}
¦ _ ¯ @
[VFO/MEMO] [MEM] [EDT]
[M-CH][MENU]
[Ω][≈]
[F-1] [DEL][SPC]
[MAIN DIAL]
Keypad
• When programing a memory name
Character type Cursor
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Select character type
[EXAMPLE]: Programming “DX spot” into Memory
channel 99.
Push
Push
To Next Page
Loading...
Need help?
General
