Icom i9100 User Manual

11
145
SCANS
Scan
–
∂F frequency +∂F frequency
Center frequency
(Start frequency)
Jump
Mch 1 Mch 5
Mch 2 Mch 3 Mch 4
Mch 6Mch 7Mch 99
SEL
SELSEL
SEL
SEL
Mch 1 Mch 5
Mch 2 Mch 3 Mch 4
Mch 6Mch 7Mch 99
SEL
SELSEL
SEL
SEL
FM FM
USB
FM
CW
USBFM
FM
Scan
1A
2A
3A
1b
2b
3b
Jump
Scan edges
■ Scan types
Scanning automatically searches for signals and
makes it easier to locate new stations for contact or lis-
teningpurposes.TheIC-9100hasseveralscantypes;
Programmed scan, Memory scan, Select Memory
scan, Mode Select scan and ∂F (Delta Frequency)
scan.
The MAIN and SUB Bands can be independently
scanned. When the SUB Band setting mode is turned ON
(“
” appears), the SUB Band is scanned.
MEMORY SCAN (p. 150)
Repeatedly scans all programmed Memory chan-
nels.
This scan operates in the memory mode.
PROGRAMMED SCAN (p. 149)
Repeatedly scans between scan edges. P1 scans
between 1A and 1b, P2 scans between 2A and 2b,
and P3 scans between 3A and 3b frequencies.
This scan operates in the VFO mode.
SELECT MEMORY SCAN (p. 151)
Repeatedly scans all Select Memory channels.
This scan operates in the memory mode.
MODE SELECT SCAN (p. 150)
Repeatedly scans all selected mode Memory chan-
nels.
This scan operates in the memory mode.
∂F SCAN (p. 152)
Repeatedly scans within the ∂F span area.
This scan operates in both VFO and memory
modes.

Icom i9100 Specifications

General

Brand	Icom
Model	i9100
Category	Transceiver
Language	English