Icom i9100 User Manual

21
1
PANEL DESCRIPTION
■ Function display (Continued)
D Function keys on M3 (Menu 3) display
(Mode: DV)
CALL SIGN KEY [CS](F-1) (p. 85)
Push to display the “CS” screen.
•ThecurrentcallsignforDVoperationappears.
CALL RECORD KEY [CD](F-2) (p. 95)
Push to display the “CD” screen.
•Thecallrecordchannel appears. (RX01 to RX20)
R>CS KEY [R>CS](F-3) (p. 96)
Hold down for 1 second to copy and set the previously
received station call sign as the station call sign for
making a call.
UR KEY [UR](F-4) (p. 101)
Push to display the “UR” screen.
•Thedesiredstationorrepeatercallsigncanbeselected.
DSET KEY [DSET](F-5) (p. 118)
Push to enter the DV Set mode.
D Function keys on D1 display
(Mode: DV) (Only when “ ” is displayed.)
CALL SIGN KEY [CS](F-1) (p. 85)
Push to display the “CS” screen.
•ThecurrentcallsignforDVoperationappears.
CALL RECORD KEY [CD](F-2) (p. 95)
Push to display the “CD” screen.
•Thecallrecordchannel appears. (RX01 to RX20)
R>CS KEY [R>CS](F-3) (p. 96)
Hold down for 1 second to copy and set the previously
received station call sign as the station call sign for
making a call.
UR KEY [UR](F-4) (p. 101)
Push to toggle the UR and the repeater call sign selection
screen
.
•Thedesiredstationorrepeatercallsigncanbeselected.
DSET KEY [DSET](F-5) (p. 118)
Push to enter the DV Set mode.
D Function keys on D2 display
(Mode: DV) (Only when “ ” is displayed.)
SCAN KEY [SCAN](F-1)
➥ Push to start or cancel the Access repeater scan.
(p. 100)
➥ Hold down for 1 second to enter the Scan Set mode.
(p. 147)
SEL KEY [SEL](F-2) (p. 100)
Hold down for 1 second to display the “SEL” screen.
(“R1USE” setting for the selected repeater)
AFC KEY [AFC](F-3) (p. 69)
Push to turn the AFC function ON or OFF.
•“ ” is displayed when the AFC function is ON.
DSQ KEY [DSQ](F-4) (p. 114)
➥ Push to select a digital squelch function between
digital call sign squelch and digital code squelch.
➥ Hold down for 1 second to display the “DSQ” screen
(digital squelch).
TONE CONTROL SET MODE KEY [TCON](F-5)
(p. 169)
Push to enter the Tone Control Set mode.
The optional UT-121 is required for DV mode operation.

Icom i9100 Specifications

General

Brand	Icom
Model	i9100
Category	Transceiver
Language	English