INVT Goodrive270 Series User Manual

Goodrive270 series VFD for fan and pump Basic operation guidelines
-115-
Function
code
Name
Description
Default
P07.39
Input terminal status at
present fault
0x0000–0xFFFF
0x0000
P17.12
Digital input terminal status
0x0000–0xFFFF
0x0000
5.5.12 Digital output
The VFD carries two groups of relay output terminals and one open collector Y output terminal. The
function of all the digital output terminals can be programmed through function codes.
0
1
2
3
4
5
.
.
.
.
29
30
P06.01
P06.04
P06.03
T delay
T delay
T delay
0
1
P06.05 output polarity
selection
(Default value: 0)
(Default value: 0)
(Default value: 1)
0
1
0
1
Delay
-1
-1
-1
P17.13
Digital output
terminal status
P07.40
Output terminal
status at
present fault
Fault？
Fault
Run
Y BIT0 Reserved BIT1
ROI BIT2 RO2 BIT3
P06.05, P17.13, P07.40 display
P06.00
0: Open collector high-speed
pulse output
1: Open collector output
P06.07
P06.11
P06.13
Y
RO2
RO1
Digital switch-off
delay
Digital output
selection
T delay
T delay
T delay
Delay
P06.06
P06.10
P06.12
Digital switch-on
delay
The following table lists the function code options. A same output terminal function can be repeatedly
selected.
Value
Function
Description
0
Invalid
The output terminal does not have any function.
1
Running
The ON signal is output when there is frequency
output during running.
2
Running forward
The ON signal is output when there is frequency
output during forward running.
3
Running reversely
The ON signal is output when there is frequency
output during reverse running.
4
Jogging
The ON signal is output when there is frequency
output during jogging.
5
VFD in fault
The ON signal is output when a VFD fault occurred.
6
Frequency level detection
FDT1
Refer to the description for P08.32 and P08.33
7
Frequency level detection
FDT2
Refer to the description for P08.34 and P08.35
8
Frequency reached
Refer to the description for P08.36

INVT Goodrive270 Series Specifications

General

Brand	INVT
Model	Goodrive270 Series
Category	Water Pump
Language	English