INVT Goodrive270 Series User Manual

Goodrive270 series VFD for fan and pump Function parameter list
-246-
Function
code
Name
Description
Default
Modify
(master/slave mode 0) to torque mode
(master/slave mode 1) at a frequency point.
Tens place: Slave start command source
0: Master
1: Determined by P00.01
Hundreds place: Whether to enable
master/slave to send/receive data
0: Enable
1: Disable
P28.03
Slave speed gain
0.0–500.0%
100.0%
○
P28.04
Slave torque gain
0.0–500.0%
100.0%
○
P28.05
Frequency point for
switching between
speed mode and
torque mode in
master/slave mode
2
0.00–10.00Hz
5.00Hz
○
P28.06
Number of slaves
0–15
1
◎
P89 group––HVAC status viewing
Function
code
Name
Description
Default
Modify
P89.00
HVAC function
status
0: Invalid
1: Valid
0
●
P89.01
Variable-frequency
motor run sequence
1–8
The sequences 1–8 correspond to motors A–H.
For fixed variable-frequency motors, the value is
255.
1
●
P89.02
Multi-motor validity
status
0x00–0xFF
Bit 0–Bit 7 correspond to motors A–H.
0: The corresponding motor is invalid and
cannot be put into service.
1: The corresponding motor is valid and can be
put into service.
0x00
●
P89.03
Power-frequency
motor run status
0x00–0xFF
Bit 0–Bit 7 correspond to motors A–H.
0: The corresponding motor stops.
0x00
●

INVT Goodrive270 Series Specifications

General

Brand	INVT
Model	Goodrive270 Series
Category	Water Pump
Language	English