INVT Goodrive270 Series User Manual

Goodrive270 series VFD for fan and pump Function parameter list
-199-
Function
code
Name
Description
Default
Modify
at 2nd-last fault
P07.56
Output terminal
status at 2nd-last
fault
0x0000–0xFFFF
0x0000
●
P08 group––Enhanced functions
Function
code
Name
Description
Default
Modify
P08.00
ACC time 2
For details, see P00.11 and P00.12.
The VFD has four groups of ACC/DEC time,
which can be selected by P05. The factory
default ACC/DEC time of the VFD is the first
group.
Setting range: 0.0–3600.0s
Depends
on model
○
P08.01
DEC time 2
Depends
on model
○
P08.02
ACC time 3
Depends
on model
○
P08.03
DEC time 3
Depends
on model
○
P08.04
ACC time 4
Depends
on model
○
P08.05
DEC time 4
Depends
on model
○
P08.06
Running frequency
of jog
The function code is used to define the
reference frequency during jogging.
Setting range: 0.00Hz–P00.03 (Max. output
frequency)
5.00Hz
○
P08.07
ACC time for
jogging
ACC time for jogging means the time needed for
the VFD to accelerate from 0Hz to the max.
output frequency (P00.03).
DEC time for jogging means the time needed for
the VFD to decelerate from the max. output
frequency (P00.03) to 0Hz.
Setting range: 0.0–3600.0s
Depends
on model
○
P08.08
DEC time for
jogging
Depends
on model
○
P08.09
Jump frequency 1
When the set frequency is within the range of
jump frequency, the VFD runs at the boundary
of jump frequency.
The VFD can avoid mechanical resonance
points by setting jump frequencies. The VFD
supports the setting of three jump frequencies. If
the jump frequency points are set to 0, this
0.00Hz
○
P08.10
Jump frequency
amplitude 1
0.00Hz
○
P08.11
Jump frequency 2
0.00Hz
○
P08.12
Jump frequency
amplitude 2
0.00Hz
○
P08.13
Jump frequency 3
0.00Hz
○

INVT Goodrive270 Series Specifications

General

Brand	INVT
Model	Goodrive270 Series
Category	Water Pump
Language	English