Preface and general information
About these Operating Instructions
Conventions used in this Manual
1
14
EDBCSXA064 EN 3.2
1 Preface and general information
1.1 About these Operating Instructions
These Operating Instructions will assist you in connecting and commissioning the ECSxA...
axis modules.
They contain safety instructions which must be observed!
All persons working on and with the ECSxA... axis modules must have the Operating
Instructions available and must observe the information and notes relevant for their work.
The Operating Instructions must always be in a complete and perfectly readable state.
1.1.1 Conventions used in this Manual
This Manual uses the following conventions to distinguish between different types of
information:
Information type Print
(in the descriptive text)
Example
System block name bold The SB DIGITAL_IO...
System block variable identifier italics The input DIGIN_bIn1_b...
Further information ...
about the conventions used for the Lenze variable identifiers, system blocks,
function blocks, and functions can be found in the appendix of the DDS online
documentation "Introduction to IEC 61131−3 programming".
The compliance with these conventions ensures uniform and universal
labelling and makes reading PLC programs easier.
To Next Page
Loading...
Need help?
General
