Mindray TE5 User Manual

System Maintenance 17-1
17 System Maintenance
Routine system maintenance shall be carried out by the user. System maintenance after the
warranty has expired is the full responsibility of the owner/operator.
The responsibility for maintenance and management of the product after delivery resides with the
customer who has purchased the product.
If you have any questions, please contact the Mindray Customer Service Department or a sales
representative.
WARNING:
Only an authorized Mindray service engineer can perform
maintenance which is not specified in this operator’s
manual.
For the sake of system performance and safety, perform
periodical checks of the system.
17.1 Daily Maintenance
You are responsible for daily maintenance.
17.1.1 Cleaning the System
WARNING:
Before cleaning the system, be sure to turn off the power
and disconnect the power cord from the outlet. Cleaning the
system while the power is “On” may result in electric shock.
DO NOT directly spray solution onto the display, system
display or hard surfaces that are under pressure or pumped.
Ingress fluid leakage into the display or system can damage
the display or system, causing possible electric shock or
system failure.
CAUTION:
Do not spill water or other liquids into the system while cleaning.
This may result in malfunction or electric shock.
NOTE:
DO NOT use hydrocarbon glass cleaner or cleaner for OA (Office Automation)
equipment to clean the display. These substances may cause deterioration of the
display.
 Cleaning the probe
Tools: mild soapy water, soft dry cloth, soft brush
1. Wipe away dust attached to the surface of the probe head, connector and cable.
2. Use a soft brush to gently brush away dust from inside the probe connector.

Mindray TE5 Specifications

General

Brand	Mindray
Model	TE5
Category	Medical Equipment
Language	English