Electrical Safety Inspection E-1
Appendix E Electrical Safety
Inspection
The following electrical safety tests are recommended as part of a comprehensive preventive
maintenance program. They are a proven means of detecting abnormalities that, if
undetected, could prove dangerous to either the patient or the operator. Additional tests may
be required according to local regulations.
All tests can be performed using commercially-available safety analyzer test equipment.
These procedures assume the use of a 601PROXL International Safety Analyzer or
equivalent safety analyzer. Other popular testers which comply with IEC 60601-1 and are
used in Europe, such as Fluke, Metron or Gerb, may require modifications to the procedure.
Follow the analyzer manufacturer's instructions.
An electrical safety inspection should be periodically performed every two years. The
safety analyzer is also an excellent troubleshooting tool for detecting abnormalities in line
voltage and grounding, as well as total current loads.
E.1 Power Cord Plug
E.1.1 The Power Plug
No broken or bent pins. No discolored pins.
No physical damage to the plug body.
No physical damage to the strain relief. No plug
warmth when device is in use.
No physical damage to the cord. No deterioration
to the cord.
For devices with detachable power cords, inspect
the connection with the device.
For devices with non-detachable power cords,
inspect the strain relief at the device.
To Next Page
Loading...
Need help?
General
