G-2 iWorks (Auto Workflow Protocol)
G.3 Screen Display
Displays the protocol name.
Current view type, highlighted in blue.
Views contained of the current type.
G.4 View Operation
In iWorks status, you can perform view selection, repeat, replacement and delete operations
using the touch screen.
For some views, the system switches to the relevant imaging modes if necessary.
The comment for the current view has been automatically added to the bottom-left corner of
the image, ready for you to scan the specified anatomy.
G.4.1 View Selection
Tap view name to select the view to be scanned. The name of the current view is in blue.
G.4.2 View Operation
In the current active view, you can perform image scanning, measurements, and adding
comments and body marks, etc. Operations are the same as those for manual operation. See
the relevant chapters for details.
Tips: If the selected view is configured with measurement items, you can tap [Freeze] and
then tap [Update] to start measurement.
To Next Page
Loading...
Need help?
General
