Configure Switching
126
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
View Rapid STP Information
Use the Rapid STP page to view information about Rapid Spanning Tree (RSTP) port status.
 To view information about RSTP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > STP > Advanced > RSTP.
6. Select which type of interfaces display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
7. To refresh the page with the latest information about the switch, click the Update button.
To Next Page
Loading...
Need help?
General