NETGEAR ProSafe XS728T User Manual

Configure Quality of Service
216
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
7. Change the class configuration as needed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Delete an IPv6 DiffServ Class
 To delete an IPv6 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration.
The IPv6 Class Name page displays.
6. Select the check box for the class name.
7. Click the Delete button.
The class is removed.
Configure a DiffServ Policy
Use the Policy Configuration page to associate a collection of classes with one or more
policies.
Add and Configure a DiffServ Policy
 To add and configure a DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English